M-O-8 Specialities Ltd, a company at the forefront of sustainable practices, have been
supplying its Green Machining Range of advanced cutting oils and lubricants for over 15 years. M-O-8 offer a full range of vegetable based oils including Neat Cutting Oils, Soluble Metalworking Fluids, Slideway and Hydraulic fluids.
Based on renewable and sustainable vegetable oil technology. A great alternative to Mineral Oil based products. Many benefits to using Vegetable Oil alternatives over a standard mineral oil.
Hazard Free CLP Classification
Lower viscosity mineral oils carry a health hazard where GM Range is label free
Higher Flash Point
A higher flash point than mineral oil meaning a reduced risk of flash fires.
Read Our Latest Press Release...
GM-Cut SF5
Download TDSNeat Cutting Oil – Available in 20L, 200L, 1000L
A low viscosity extra high performance neat cutting oil based on advanced ester technology from renewable raw materials, particularly suited to honing or grinding operations where good wetting ability is required. This wetting phenomina provides high washing performance ensuring clean finishing stones or grinding wheels. Suitable for machining ferrous and non ferrous materials on a wide range of applications.
The product should be used neat.
GM-Cut SF10
Download TDSNeat Cutting Oil – Available in 20L, 200L, 1000L
A blend of premium vegetable sourced oils especially selected to bring exceptional lubricant power to the oil. A high performance lubricant suitable for all metals, and every kind of machining. Recommended for all machining operations, including the most difficult (chip removal or deformation). Compatible with all metals: ferrous and nonferrous metals, including copper alloys.
The product should be used neat.
GM-Cut SF20
Download TDSNeat Cutting Oil – Available in 20L, 200L, 1000L
A blend of premium vegetable sourced oils especially selected to bring exceptional lubricant power to the oil. A high performance lubricant suitable for all metals, and every kind of machining. Recommended for all machining operations, including the most difficult (chip removal or deformation). Compatible with all metals: ferrous and nonferrous metals, including copper alloys.
The product should be used neat.
Arterial GM 7500 BFF
Download TDSSoluble Metalworking Fluid – Available in 20L, 200L, 1000L
Arterial GM 7500 BFF is a state-of-the-art multi metal, multi-application high end soluble metal working fluid that is Boron and Formaldehyde free. Incorporating a complex of high-performance
synthetic esters of plant origin. Particularly suitable for very difficult machining of a wide range of materials such as: aerospace aluminium, aluminium, titanium, titanium alloys, Ni-steel, stainless steels and magnesium alloys.
GM-Hyd 32
Download TDSISO 32 Hydraulic Fluid – Available in 20L, 200L, 1000L
Environmentally acceptable hydraulic fluid, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free.
GM-Hyd 46
Download TDSISO 46 Hydraulic Fluid – Available in 20L, 200L, 1000L
Environmentally acceptable hydraulic fluid, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free.
GM-Slide 68
Download TDSISO 68 Slideway Lubricant – Available in 20L, 200L, 1000L
Environmentally acceptable slideway oil, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin.
The product should be used neat.
GM-Spray 12
Download TDSMQL Lubricant – Available in 5L, 20L, 205L
A renewable neat cutting oil for minimum quantity lubrication. It can be applied by minimum lubrication equipment to a variety of metals and allows for a wide range of metalworking operations.
The product should be used neat.
To request a Material Safety Data Sheet, Click Here. | To request a quotation, Click Here.
GM-Cut SF5
Neat Cutting Oil – Available in 20L, 200L, 1000L
A low viscosity extra high performance neat cutting oil based on advanced ester technology from renewable raw materials, particularly suited to honing or grinding operations where good wetting ability is required. This wetting phenomina provides high washing performance ensuring clean finishing stones or grinding wheels. Suitable for machining ferrous and non ferrous materials on a wide range of applications.
The product should be used neat.
GM-Cut SF10
Neat Cutting Oil – Available in 20L, 200L, 1000L
A blend of premium vegetable sourced oils especially selected to bring exceptional lubricant power to the oil. A high performance lubricant suitable for all metals, and every kind of machining. Recommended for all machining operations, including the most difficult (chip removal or deformation). Compatible with all metals: ferrous and nonferrous metals, including copper alloys.
The product should be used neat.
GM-Cut SF20
Neat Cutting Oil – Available in 20L, 200L, 1000L
A blend of premium vegetable sourced oils especially selected to bring exceptional lubricant power to the oil. A high performance lubricant suitable for all metals, and every kind of machining. Recommended for all machining operations, including the most difficult (chip removal or deformation). Compatible with all metals: ferrous and nonferrous metals, including copper alloys.
The product should be used neat.
Arterial GM 7500 BFF
Soluble Metalworking Fluid – Available in 20L, 200L, 1000L
Arterial GM 7500 BFF is a state-of-the-art multi metal, multi-application high end soluble metal working fluid that is Boron and Formaldehyde free. Incorporating a complex of high-performance
synthetic esters of plant origin. Particularly suitable for very difficult machining of a wide range of materials such as: aerospace aluminium, aluminium, titanium, titanium alloys, Ni-steel, stainless steels and magnesium alloys.
GM-Hyd 32
ISO 32 Hydraulic Fluid – Available in 20L, 200L, 1000L
Environmentally acceptable hydraulic fluid, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free.
GM-Hyd 46
ISO 46 Hydraulic Fluid – Available in 20L, 200L, 1000L
Environmentally acceptable hydraulic fluid, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin. It is also label free.
GM-Slide 68
ISO 68 Slideway Lubricant – Available in 20L, 200L, 1000L
Environmentally acceptable slideway oil, based on renewable raw materials. The product is readily biodegradable in soil and water, non toxic for human or the environment and not irritating to skin.
The product should be used neat.
GM-Spray 12
MQL Lubricant – Available in 5L, 20L, 205L
A renewable neat cutting oil for minimum quantity lubrication. It can be applied by minimum lubrication equipment to a variety of metals and allows for a wide range of metalworking operations.
The product should be used neat.
To request a Material Safety Data Sheet, Click Here. | To request a quotation, Click Here.
